OziExplorer File Formats

Line 1 : File type and version information
Line 2: Geodetic Datum used for the Lat/Lon positions for each waypoint
Line 3 : Reserved for future use
Line 4 : GPS Symbol set - not used yet

• One line per waypoint
• each field separated by a comma
• comma's not allowed in text fields, character 209 can be used instead and a comma will be substituted.
• non essential fields need not be entered but comma separators must still be used (example , ,). Defaults will be used for empty fields
• Any number of the last fields in a data line need not be included at all not even the commas.

Field 1 : Number - this is the location in the array (max 1000), must be unique, usually start at 1 and increment. Can be set to -1 (minus 1) and the number will be auto generated.
Field 2 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 3 : Latitude - decimal degrees.
Field 4 : Longitude - decimal degrees.
Field 5 : Date - see Date Format below, if blank a preset date will be used
Field 6 : Symbol - 0 to number of symbols in GPS
Field 7 : Status - always set to 1
Field 8 : Map Display Format
Field 9 : Foreground Color (RGB value)
Field 10 : Background Color (RGB value)
Field 11 : Description (max 40), no commas
Field 12 : Pointer Direction
Field 13 : Garmin Display Format
Field 14 : Proximity Distance - 0 is off any other number is valid
Field 15 : Altitude - in feet (-777 if not valid)
Field 16 : Font Size - in points
Field 17 : Font Style - 0 is normal, 1 is bold.
Field 18 : Symbol Size - 17 is normal size
Field 19 : Proximity Symbol Position
Field 20 : Proximity Time
Field 21 : Proximity or Route or Both
Field 22 : File Attachment Name
Field 23 : Proximity File Attachment Name
Field 24 : Proximity Symbol Name

Line 1 : File type and version information
Line 2 : Geodetic Datum used for the Lat/Lon positions for each event
Line 3 : Reserved for future use
Line 4 : Reserved for future use

• One line per event
• each field separated by a comma
• non essential fields need not be entered but comma separators must still be used (example , ,). Defaults will be used for empty fields

Field 1 : Number - this is the location in the array (max 1000), must be unique, usually start at 1 and increment.
Field 2 : Latitude - decimal degrees.
Field 3 : Longitude - decimal degrees.
Field 4 : Symbol - 0 to number of symbols in GPS
Field 5 : Map Display Format - not yet used, set to 0
Field 6 : Foreground Color (RGB value)
Field 7 : Background Color (RGB value)
Field 8 : Symbol Size - 17 is normal size

• Line 1 : File type and version information
• Line 2 : Geodetic Datum used for the Lat/Lon positions for each trackpoint
• Line 3: “Altitude is in feet” - just a reminder that the altitude is always stored in feet
• Line 4: Reserved for future use
• Line 5 : multiple fields as below
  • Field 1 : always zero (0)
  • Field 2 : width of track plot line on screen - 1 or 2 are usually the best
  • Field 3 : track color (RGB)
  • Field 4 : track description (no commas allowed)
  • Field 5 : track skip value - reduces number of track points plotted, usually set to 1
  • Field 6 : track type - 0 = normal , 10 = closed polygon , 20 = Alarm Zone
  • Field 7 : track fill style - 0 =bsSolid; 1 =bsClear; 2 =bsBdiagonal; 3 =bsFdiagonal; 4 =bsCross; 5 =bsDiagCross; 6 =bsHorizontal; 7 =bsVertical;
  • Field 8 : track fill color (RGB)
• Line 6 : Number of track points in the track, not used, the number of points is determined when reading the points file

• One line per trackpoint
• each field separated by a comma
• non essential fields need not be entered but comma separators must still be used (example , ,). Defaults will be used for empty fields.

Field 1 : Latitude - decimal degrees.
Field 2 : Longitude - decimal degrees.
Field 3 : Code - 0 if normal, 1 if break in track line
Field 4 : Altitude in feet (-777 if not valid)
Field 5 : Date - see Date Format below, if blank a preset date will be used
Field 6 : Date as a string
Field 7 : Time as a string

Note that OziExplorer reads the Date/Time from field 5, the date and time in fields 6 & 7 are ignored.

Example
-27.350436, 153.055540,1,-777,36169.6307194, 09-Jan-99, 3:08:14
-27.348610, 153.055867,0,-777,36169.6307194, 09-Jan-99, 3:08:14

• Line 1 : File type and version information
• Line 2 : Geodetic Datum used for the Lat/Lon positions for each point
• Line 3: Reserved for future use
• Line 4: Reserved for future use
• Line 5 : multiple fields as below
  • Field 1 : point set fore color (RGB)
  • Field 2 : point set back color (RGB)
  • Field 3 : point set size
  • Field 4 : point set font size
  • Field 5 : point set format
  • Field 6 : point set style
  • Field 7 : point set description (no commas)

• One line per point
• each field separated by a comma
• non essential fields need not be entered but comma separators must still be used (example , ,). Defaults will be used for empty fields

Field 1 : Latitude - decimal degrees.
Field 2 : Longitude - decimal degrees.
Field 3 : rotation angle
Field 4 : point name
Field 5 : description 1 (no commas)
Field 6 : description 2 (no commas)
Field 7 : description 3 (no commas)

Line 1 : File type and version information
Line 2: Geodetic Datum used for the Lat/Lon positions for each waypoint in the routes
Line 3 : Reserved for future use
Line 4 : Reserved for future use

• One line per route followed by each waypoint in the route
• each field separated by a comma
• comma's not allowed in text fields, character 209 can be used instead and a comma will be substituted.
• non essential fields need not be entered but comma separators must still be used (example , ,). Defaults will be used for empty fields
• Any number of the last fields in a data line need not be included at all not even the commas.

Field 1 : R - indicating route details
Field 2 : Number - this is the location in the array, must be unique, usually start at 0 for Garmins 1 for other and increment.
Field 3 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 4 : Description.
Field 5 : Route Color as displayed on map (RGB).

Field 1 : W - indicating route waypoint details.
Field 2 : Route Number - location in array of routes
Field 3 : Number - this is the location in the array of route waypoints, this field is now ignored.
Field 4 : Wp Number - this is the number of the waypoint (the Wp number within the GPS for lowrances)
Field 5 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 6 : Latitude - decimal degrees.
Field 7 : Longitude - decimal degrees.
Field 8 : Date - see Date Format below, if blank a preset date will be used
Field 9 : Symbol - 0 to number of symbols in GPS
Field 10 : Status - always set to 1
Field 11 : Map Display Format
Field 12 : Foreground Color (RGB value)
Field 13 : Background Color (RGB value)
Field 14 : Description (max 40), no commas
Field 15 : Pointer Direction
Field 16 : Garmin Display Format

While all the waypoint details are stored with each route it is always the waypoints loaded on the map which have priority, in other words if a waypoint on the map has the same name and/or array number location as a waypoint in a route loaded from a route file the waypoint on the map could replace the waypoint currently loaded from the route record. This occurs when the user presses the relink waypoints button on the Route Editor.

Delphi stores date and time values in the TDateTime type. The integral part of a TDateTime value is the number of days that have passed since 12/30/1899. The fractional part of a TDateTime value is the time of day.

Following are some examples of TDateTime values and their corresponding dates and times:

0 - 12/30/1899 12:00 am
2.75 - 1/1/1900 6:00 pm
-1.25 - 12/29/1899 6:00 am
35065 - 1/1/1996 12:00 am